RGBlink VSP 168S User Manual page 40

4. MENU Orientation
MENU
When need HDMI signal output, choose HDMI.
DATE RANGE: DVI1 out range adjustment can choose RGB or YCBCR;
among them the RGB adjusting range is between 0-255, YCBCR adjusting
range from 16 to 235.
DE ADJUST: DE adjust, the sub-menu as following:
DE ON/OFF: Can choose to open or closed when choose open, it can be
adjusted to DE, as follows:
H SIZE: Width setting;
V SIZE: Height setting;
H Pos: Horizontal phase setting;
V Pos: Vertical phase setting;
When the signal source of the screen appear black side, can use this
function adjustment, make the image to full screen display.
RESET: If quality image distorts by mistake in improper operation, it can be
initialized operation to recover factory setting.
DVI2: sub-menu including DVI MODE, DATA RANGE, DE ADJUST,
RESET, with the same operation with DVI1.
SCALE: Scale menu, sub-menu as follows:
H SIZE: Width setting;
V SIZE: Height setting;
H Pos: Horizontal phase setting;
V Pos: Vertical phase setting;
RESET: If quality image distorts by mistake in improper operation, it can be
initialized operation to recover factory setting.
Note
The SCALE button can also fulfill this setting.
SCREEN: Screen setting, user can change the screen through the digital
setting parameters to easily change the screen size and position. Mainly
VSP 168S User Manual 40