How To Choose The Signal Source In Pip - RGBlink VSP 168S User Manual

6. System Setup and Operation

How to Choose the Signal Source in PIP

How to Choose the Signal Source in PIP
1. Press MENU button, enter menu option:
2. Rotate the knob, choose【OUTPUT】;
3. Press the knob to confirm, rotate the knob again, choose【PIP】;
4. Press the knob to confirm, rotate the knob again, choose 【SELECT】 , choose
IMAGE A as main image;
5. Choose the main image signal source, press CV1, CV2, VGA, DVI, SDI as
the main image channel, take CV2 for example:
6. The same steps, select the IMAGE B as sub-image, also press CV1, CV2,
VGA, DVI, SDI as the sub-image channel, take DVI for example:
7. With above steps, can complete the choice of signal source in PIP.
VSP 168S
>INPUT
OUTPUT
INPUT
>OUTPUT
PICTURE
>PIP
>SELECT IMAGE A
INPUT CV2：
800X600X60
INPUT DVI:
1024X768X60
Note
Main image and sub-image can choose the same
input signal source, that is, the two can show the
same picture.
User Manual
> >
> >
> >
> >
> >
> >
88