No Output In Large Screen; Confirm If There Is Any Input Signal; Confirm If Signal Output; Flash Point In Large Screen Output - RGBlink VSP 168S User Manual

No Output in Large Screen

Confirm If There is Any Input Signal

Press 【 MENU】 button to find "INPUT" and knob into the "INPUT RES INFO"
to see whether the input signal is normal, suggested the "NO INPUT" signal
does not come in, check the front-end signal lines, and please note to do
dual display or extended in computer ; you can enter other format signals to
view in the same operation.

Confirm If Signal Output

Find a belt VGA input (best for DVI) display, connect to the corresponding
output port of processor, and check whether the signal is correct on the
monitor. If not display properly, please check whether there is input signal,
or if input wire interface is taken tight, output wire interface is picked up
tightly.

Flash Point in Large Screen Output

Confirm If Monitor Output is Normal

Find a belt VGA input (best for DVI) display, connect to the corresponding
output port of processor, and check whether the signal is correct on the
monitor. If display normally shows and no flash point, please check
whether DVI outlets put tight. If display flashes point, please judge if input
signal, wire, and interface are normal.
VSP 168S User Manual 100