How To Set Up The Size And Position Of The Single Image - RGBlink VSP 168S User Manual

6. System Setup and Operation

How to Set up the Size and Position of the Single Image.

How to Set up the Size and Position of the Single Image
1. Press MENU button, enter menu option;
2. Rotate the knob, choose 【OUTPUT】;
3. Press the knob to confirm, rotate the knob again, choose【SCALE】;
4. Press the knob to confirm, enter【SCALE】, rotate the knob to choose
the corresponding parameters and set to default values, (the default
value can also be set via the number button), after setting finish, press
the knob to confirm;
5. If the operation is wrong, or want to factory resetting, enter 【SCALE】
option, choose ―RESET‖ to recover factory RESET.
VSP 168S
>INPUT
OUTPUT
INPUT
>OUTPUT
OUTPUT ADJUST > >
>SCALE
>H SIZE
V SIZE
>H POS
V POS
>RESET
Note
Same as 【SCALE】 key.
User Manual
> >
> >
> >
> >
> >
1920
1080
0
0
86