Mainboard Program Upgrade - RGBlink VSP 168S User Manual

Mainboard Program Upgrade

Mainboard program is upgraded via webpage, specific steps are as follows:
1. Connect VSP 168S and computer with cable.
2. Start the network function, specific steps are as follows:
MENU--SYSTEM -- ETHERNET -- NERWORK, select ON, and check
the IP address of the equipment, confirm if it is consistent with the
computer, such as 192.168.0.***, take 192.168.0.100 for example.
3. Open the webpage, input IP：192.168.0.100 (this is the default state, if
the IP address is changed, the IP address input should be consistent
with the changed IP address), then input the user name: admin,
password: rgblink123, click OK.
4. Enter the webpage, click "Fireware Upgrade" and load the page, as
shown:
5. Click "Browse...", choose mainboard directory path, the format should be
"FVB", then select "Update" to load the program.
VSP 168S User Manual 108