How To Connect Upper Monitor By Lan Interface - RGBlink VSP 168S User Manual

5. Communication Software Guideline

How to Connect Upper Monitor by LAN Interface?

How to Connect Upper Monitor by LAN Interface?
First, install the upper computer software in the computer;
Connect VSP 168S and computer with cable, the connection diagram is
as follows:
Power on VSP 168S, start the network function, specific steps are as
follows: MENU--SYSTEM -- ETHERNET -- NERWORK, select ON, and
check the IP address of the equipment, confirm if it is consistent with the
computer, such as 192.168.0.***, take 192.168.0.100 for example.
Open the upper computer software, click
follows:
Choose【Ethernet】;
VSP 168S
, interface is shown as
User Manual 71