RGBlink VSP 168S User Manual page 43

4. MENU Orientation
MENU
GrnOnWh2: Green On White 2.
RedOnBk1: Red On Black 1.
RedOnBk2: Red On Black 2.
RedOnWh1: Red On White 1.
RedOnWh2: Red On White 2.
BLEND MODE: Blend mode, with two modes, ―Mode 1‖ and ― Mode 2‖.
Mode 1: Graphic content locate at the top and is non-transparent,
background transparency is controlled by double-picture transparency;
Mode 2: Graphic content is controlled by double-picture transparency, the
background is completely transparent;
BLEND LEVEL: Can set the image display transparency, regulating range
between 0 - 16;
ABOVE/BELOW:
ABOVE: In image 2, if the pixel value is higher than the setting value, then
the image is the graphic content pixel, otherwise, it is the graphic
background pixel. It should combined with "AND/OR" conditions when
judging.
BELOW: In image 2, if the pixel value is lower than the setting value, then
the image is the graphic content pixel, otherwise, it is the graphic
background pixel. It should combined with "AND/OR" conditions when
judging.
AND/OR:
AND: All ―Red, Green, Blue‖ value must meet ABOVE or BELOW
conditions;
OR: Any one of ―Red, Green, Blue‖ value should meet ABOVE or BELOW
conditions;
RED: Red limit, cut-off point condition of ABOVE and BELOW condition in red
channel, the range is 0 ~ 255;；
GREEN: Green limit, cut-off point condition of ABOVE and BELOW condition
VSP 168S User Manual 43