2. Hardware Orientation
VSP 168S Front Panel
VSP 168S Front Panel
Insert power cord and push power to ON position. LCD module on the front
panel will show RGBLINK and go into self verification before it load last
setting and send processed image to the target monitor. For the first setup,
CV1 input is default source. With front panel keyboard, user can operate
VSP 168S through the menus on LCD panel.
VSP 168S front panel as shown in figure:
VSP 168S
AVDSP SERIES VSP168
WAIT INIT DEVICE...
User Manual
RGBLINK
视诚科技
亮彩系列
INPUT:CV1
NO INPUT
30