How To Connect Upper Monitor By Rs232 Interface - RGBlink VSP 168S User Manual

5. Communication Software Guideline

How to Connect Upper Monitor by RS232 Interface?

How to Connect Upper Monitor by RS232 Interface?
Firstly，install the control software in your PC;
Take out the RS 232 cable as following（RS-232, with 9-pin on one end，
RJ 11 on the other side）. Connect one side of the RJ11 download line to
the RS232 on the video processor VSP 168S, and the other side to be
connected to the serial port on the PC.
There is no any serial port on your PC; you will need another Serial to USB
adapter. Connect one end of the RJ11 download line to the RS232 on the
video processor. Connect the end of USB-side to the PC; Ensure the cable
connection is good. Turn on the VSP 168S Video Processor.
Right click the【My Computer】on the home screen of control PC. Enter
【Attribute】, Find【Hardware】Option，as following.
VSP 168S User Manual 73