Setting The Display Brightness; Screen Timeout; Night Mode; Network Settings - Ultratec CapTel 2400i User Manual

Setting the Display Brightness

You can adjust the brightness of the display screen for easy reading in
well-lit or dimly-lit areas. The display screen brightness changes as you
move the setting so you can see what it will look like.
Settings →

Screen Timeout

As an energy-saving measure, your CapTel screen will start becoming more
dim and gradually go complete dark after 60 seconds of non-use. Touching
the display screen restores it to its original brightness. You can set how
much time you want the screen to wait before becoming dim.
Settings →

Night Mode

There may be times that you want your CapTel display to be at a darkened
setting, called Night Mode. This is helpful, for example, in a bedroom at
night when you don't need the bright display screen. You can set how long
Night Mode stays on before the screen goes dark.
Settings →

Network Settings

If you use CapTel in a WiFi environment, the Network Settings shows you a
listing of all available WiFi networks within range, in order of the strongest
signal strength to the weakest. You can change between WiFi networks or
save common settings that you use most often.
Settings →
82
S E T T I N G S
Display → Brightness
Display → Screen Timeout
Display → Night Mode
Network
Customer Service: 888-269-7477