Standard Horizon Eclipse GX1300 Owner's Manual page 57

1. Press the MENU key to display the menu.
2. Press the ▲ / ▼ keys to select " SETUP ", then
SELECT
press the
3. Press the ▲ / ▼ keys to select " DSC SETUP ",
then press the
BACK
press the
4. Select " GROUP DIR. " with the ▲ / ▼ keys,
then press the
5. Select " ADD " with the ▲ / ▼ keys, then press
SELECT
the soft key.
6. Select " NAME " with the ▲ / ▼ keys, then press
SELECT
the soft key.
7. Press the ▲ / ▼ keys to scroll through the first
letter of the group name you want to reference
in the directory.
SELECT
8. Press the
letter in the name and step to the next letter to
the right.
9. Repeat steps 7 and 8 until the name is complete.
Press the ► key to move to the next space if you want to enter a blank
space in the name.
If a mistake was made entering in the name, press the ◄ / ► keys
repeatedly until the wrong letter is highlighted, then press the ▲ / ▼
keys to correct the entry.
10. After the twelfth letter or space has been entered, press the
key to return to the previous screen.
GX1300
soft key.
SELECT
soft key. (To cancel,
soft key.)
SELECT
soft key.
soft key to store the first
BACK SELECT
SETUP
DSC SETUPGROUP
CHANNEL SETUP
CONFIGURATION
BACK SELECT
DSC SETUP
INDIVIDUAL REPLY
INDIVIDUAL ACK
INDIVIDUAL RING
GROUP DIR.
BACK SELECT
GROUP DIR.
ADD
EDIT
DELETE
BACK SELECT
ADD
NAME:
-------------
GROUP MMSI:
0--------
BACK SELECT
ADD
NAME:
Y
-----------
BACK FINISH SELECT
FINISH
Page 57
soft