Multi Watch (To Priority Channel); Setting Up The Multi Watch Operation - Standard Horizon Eclipse GX1300 Owner's Manual

8.8 MULTI WATCH (TO PRIORITY CHANNEL)

Multi watch is used to scan two or three channels for communications.
In Dual Watch, a normal VHF channel and the priority channel are

scanned alternately.
In Triple Watch, a normal VHF channel, the priority channel, and the sub

channel are scanned alternately.
When a signal is received on the normal channel the radio briefly switches
between the normal channel and the priority channel to look for a transmission.
If the radio receives communications on the priority channel the radio stops and
listens to the priority channel until communication ends and then starts dual or
triple watch scan again.

8.8.1 Setting up the Multi Watch Operation

1. Press the MENU key to display the menu.
2. Select " SETUP " with the ▲ / ▼ / ◄ / ► keys,
then press the
3. Press the ▲ / ▼key to select " C H A N N E L
SETUP ", then press the
4. Select " MULTI WATCH " with the ▲ / ▼ keys,
then press the
5. Press the ▲ / ▼ keys to select " D U A L " or
" TRIPLE ."
ENTER
6. Press the
setting.
BACK
7. Press the
GX1300
SELECT
soft key.
SELECT
SELECT
soft key.
soft key to store the selected
soft key to exit the menu.
soft key.
BACK SELECT
SETUP
DSC SETUP
CHANNEL SETUP
CONFIGURATION
BACK SELECT
CHANNEL SETUP
WEATHER ALERT
MULTI WATCH
SCAN MEMORY
SCAN TYPE
BACK SELECT
MULTI WATCH
DUAL
TRIPLE
BACK ENTER
Page 31