Standard Horizon Eclipse GX1300 Owner's Manual page 59

5. Press the ▲ / ▼ keys to select a group you
want to contact, then press the
key.
6. Press the ▲ / ▼ keys to select the operat-
ing channel you want to communicate on and
SELECT
press the
YES
7. Press the
call signal.
8. After the group call is transmitted, the trans-
ceiver will switch to the channel selected in
step 6 above, without changing the display. To
change the display, press the
9. Listen to the channel to make sure it is not busy, then key the micro-
phone and call the other vessels you desire to communicate with.
Group Call - Manual Group MMSI Entry
You may enter an MMSI number manually to contact a vessel without storing
the MMSI in the Group Call Directory.
1. Press the MENU key to display the menu.
2. Press the ▲ / ▼ keys to select " DSC ", then
SELECT
press the
3. Press the ▲ / ▼ keys to select " INDIVIDU-
AL ", and then press the
cancel, press the
4. Press the ▲ / ▼ keys to select " NEW ID ", then
SELECT
press the
GX1300
soft key.
soft key to transmit the group
QUIT
soft key.
SELECT
BACK
soft key.)
soft key.
SELECT
soft
soft key.
soft key. (To
HISTORY
YAESU GP
USCG GP
MEMORY SHIPS
HORIZON GP
BACK SELECT
INTERSHIP CH
CH:06
CH:08
CH:09
CH:10
BACK SELECT
GROUP
YAESU GP
CATEG: ROUTINE
CH: 08
Transmit a Call?
YES NO
GROUP
YAESU GP
CH: 08
SINCE: 00:05
[ Transmitted
QUIT
BACK SELECT
DSC CALL
INDIVIDUAL
GROUP
ALL SHIPS
DIST ALERT MSG
BACK SELECT
GROUP
HISTORY
MEMORY
NEW ID
BACK SELECT
Page 59
]