Making A Data Call Using Hyperterminal - Inmarsat LandPhone User Manual

Satellite phone

Hide thumbs Also See for LandPhone:

Table of Contents

Making a data call using HyperTerminal

Making an outgoing data call

To make an outgoing data call using HyperTerminal:

1. Run the HyperTerminal software from Windows. (HyperTerminal

is usually located in Start > Programs > Accessories >

Communications.)

2. Type Test (or another name for the connection) in the displayed

window, then click OK. The Connect To window displays.

3. Select the Standard 2400 bps Modem in the modem lists, then click

OK.

4. In the Connect window, click Cancel.

5. In the Hyperterminal screen, type AT and press <Enter>.

The terminal returns the response OK.

6. If you are ready to make a data call, dial to the required number

in the format 'ATDT*****' (where ***** is the dialed number) and

press <Enter>. For example, to enter 00 44 20 7123 4567, dial

'ATDT00442071234567'.

Receiving an incoming data call

To receive an incoming data call using HyperTerminal:

1. Run the HyperTerminal software from Windows. (HyperTerminal

usually located in Start > Programs > Accessories >

Communications.) The following window displays:

Setting up a fax or data connection

Table of Contents