Deactivating CLI
To deactivate CLI:
Call holding
This service allows you to put an active call on hold. To do this:
1. Lift the telephone handset and press
#55* on the telephone keypad.
#55* displays on the LCD, followed
by OK. You hear a rapid busy tone
meaning that CLI has been successfully
deactivated.
2. Hang up to return to the main screen.
1. While on an active call, press the
flash/recall button (or equivalent)
on the phone. The letter H displays
in the upper right corner of the LCD,
and the caller is put on hold.
2. Press the flash/recall button
(or equivalent) again to retrieve
the held call. The H is replaced
by the call counter.
Supplementary services
29