Inmarsat LandPhone User Manual page 22

Entering and changing channel numbers
This section explains how to enter and change a channel number on
the LandPhone.
Entering the channel number
Inmarsat recommends that you manually enter the channel number
for your location into the LandPhone, even if the LandPhone registers
automatically with the satellite. This ensures the future reliability of the
registration process.
Note: You do not need to do this if you entered the channel number
manually, as described in 'Further guidance' on page 22.
To manually enter the channel number:
1. Refer to the I-4 coverage map supplied in this guide, and select the
channel number closest to your location.
2. Lift the telephone receiver, and key in #62*. The LCD displays
Channel 0:
3. Key in the two digit channel number, followed by #. The LCD
displays Channel 1:
4. Replace the telephone receiver.
The LandPhone stores the channel number you enter, and uses it
whenever it registers with the satellite.
You will only need to re-enter the channel number in any of the
following scenarios:
• You enter more than one channel number by mistake.
• You move your LandPhone to a location outside the coverage area
of the current channel number.
• Inmarsat or your service provider notifies you that the channel
numbers have changed.
Connecting to the network
23