Table of Contents
Advertisement
iFleetONE™ Terminal Installation Manual
APPENDIX B GPIO PORT
B-1
Data Connection Switch
The data connection switch is used for enabling / disabling the data connection of the Wideye
iFleetONE™ terminal.
The recommended model and part number of the data connection switch is ACROLECTRIC
SWITCH (P/N: C1350XBAAA), which is a non-illuminated rocker switch.
This item is not included in the packaging list.
NOTE
The connection diagram is illustrated below:
GPIO - 1
(6V)
GPIO - 3
(PDP_ON/OFF)
The steps of the connection are as follow:
1. Solder AWG 24 wires between the rocker switch's terminal lugs.
2. Mount the rocker switch on the panel according to its cut-out hole dimension.
CLOSED
: Data Connection
OPEN
: No Data Connection
Page 40 of 41
Advertisement
Table of Contents
