Inmarsat LandPhone User Manual page 47

Unlocking the PIN
If you enter the SIM PIN incorrectly three times, the LandPhone locks
and the LCD displays Enter SIM PUK.
5. L ift the telephone handset again, and enter the four-digit PIN again.
6. Replace the telephone handset. The LCD displays Searching. This
indicates that you have successfully unlocked your LandPhone.
Enabling or disabling the PIN code feature
If required, you can enable or disable the PIN code feature. Disabling
the feature means that you are not asked to enter a PIN when you
switch on the LandPhone. To enable or disable the PIN code feature:
48
Supplementary services
You must use the PUK code supplied
by your service provider to unlock the
LandPhone. You can then re-set the PIN.
To do this
1. L ift the telephone handset, and key in
PUK code.
2. Replace the telephone handset. The
LCD displays Enter new PIN.
3. Lift the telephone handset again, and
enter the four-digit PIN you want to use.
This can be the same as the existing PIN,
or a PIN of your choice.
4. Replace the telephone handset. The
LCD displays Repeat new PIN.
1. L ift the telephone handset, and key in
#60*. The LCD displays Enter PIN.
2. U sing the telephone keypad, enter the
four-digit PIN code followed by #.
3. Replace the handset.
4. W ait several seconds. The LCD displays
OK. The status of the PIN code feature
has changed (if it was previously enabled
it is now disabled, for example).