Table of Contents
Advertisement
Playback
(continued)
Viewing the status of the recorder
(Overlay OSD)
Use the following function to see the status of the recorder
or trigger signal (GPI1-16) status when a played back file
was recorded.
1. Press the [MENU] button.
The Menu appears.
,
2. Press the [
] buttons to select [Setup/Info]
and press the [
] button to confirm the entry.
Select
Confirm
,
3. Press the [
] buttons to select [Overlay
OSD].
Select
RETURN
MENU
CONTROL PANEL
ON/
OFF
,
4. Press the [
"SIMPLE", "DETAILS" or "OFF".
select
AUTO : T he simple overlay OSD appears for to 5 seconds
when any of the following items have been changed
(see page 70).
• Playback filename
• Mode indication
• Playback speed and status indication
SIMPLE: The Simple overlay OSD appears.
DETAILS: The Detailed overlay OSD appears.
OFF: Overlay OSD closes.
Notes:
•
An administrator can set the Overlay OSD (Init Overlay
OSD) selected at power-on.
•
See the next page for how to read the overlay OSD.
•
When "AUTO" is selected and the [BOOK MARK] button
is pressed or the bookmark position is reached, the simple
overlay OSD does not appear but the bookmark icon
appears for 1 to seconds.
•
When "AUTO" is selected and the trigger position is reached,
the simple overlay OSD does not appear but the trigger icon
appears for 1 to seconds.
Adjusting the display position
When a picture recorded with Main OSD or Sub OSD
embedded on the Embedded OSD screen in Administrator
setup set to OFF is played, Trigger, Time, and Source@
Area that are set to ON on the Embedded OSD screen are
displayed. Select [Position (Press ENTER)] on the Setup/Info
screen then press [
move up and down.
Note:
The OSD position of the picture recorded with Main OSD or
Sub OSD on the Embedded OSD screen in Administrator
setup set to ON cannot be changed.
Playback with the remote control panel is not available at
present. Upgrading is scheduled for the future.
For playback, it is recommended to use the Front-End
application or Back-End Client application.
69
Cursor button
MENU button
] buttons to select "AUTO",
] button. Then the display position will
Hide quick links:
Advertisement
Table of Contents
