Table of Contents
Advertisement
Transferring Files
Exporting files
Video and audio data recorded on the SDHC Memory Cards
are copied to the USB memory device. Exported data are
deleted from the cards.
Notes:
•
Export cannot be executed while recording or post-
recording. If export is selected while recording, a
confirmation dialog box appears. Select [Stop] to stop
recording and start exporting, or [Cancel] to continue
recording. If export is selected while post-recording, post-
recording stops and export starts.
•
If the updating file is stored on the USB memory device,
error message "E8406" appears and files cannot be
exported.
•
If a USB memory device for authentication is removed
or inserted, an error message "E801" appears. While
exporting, do not insert or remove the USB memory
device, even if it is not accessed.
•
Be sure to set Export Menu on the Management Mode
screen in Administrator setup to ENABLE. Otherwise
[Export/Upload] cannot be selected. (See "Export Menu"
on page 89.)
•
If the Front-End application is connected, export is
disabled.
•
Export will be canceled if the Front-End application is to
be connected during exporting.
1. Press the [MENU] button.
The Menu appears.
2. Press the [
,
] buttons to select [Export/
Upload] and press the [
the entry.
] button to confirm
RETURN
MENU
CONTROL PANEL
ON/
OFF
Select
Confirm
,
3. Press the [
and press the [
Select
Confirm
Files are exported.
Note:
The USB1 and USB progress bars are displayed on the
screen, but the USB connectors on the recorder are not
discriminated. If two USB memory devices are connected,
you cannot specify the device used for exporting. Check the
access lamp on the USB memory device.
Cancel exporting
Press the [
] button.
Exporting is canceled immediately when the button is
pressed, but the data transferred before the button was
pressed are exported.
7
Cursor button
MENU button
] buttons to select [Export]
] button to confirm the entry.
Hide quick links:
Advertisement
Table of Contents
