Recording; Starting And Stopping Recording - Panasonic AG-CPD20P Operating Instructions Manual

Recording

BOOK MARK button
REC button

Starting and stopping recording

Starting recording
Press the [REC] button.
This starts video and sound recording.
The live screen appears automatically if not already on. The
Remote Control Panel, the Color Camera and the Memory
Card Recorder [REC] lamps go on during recording.
Note:
The Color Camera [REC] lamp goes on regardless of camera
input setting.
There are also other methods for starting recording. For
details, refer to "Starting Recording" on page 8.
Stopping recording
Press the [STOP] button ( ).
Pressing the [STOP] button turns off the [REC] lamp and
video and sound recordings stop when the post record
interval has elapsed. Then the [BUSY] lamp goes off.
Notes:
• When recording is stopped under the conditions in which
Classify information is registered (see page 89), Classify
on the Management Mode screen is set to "ENABLE" or
"FORCE" (see page 89), and Loop Rec on the Rec/Play
screen is set to "OFF" (see page 81), the Classify selection
screen
Select the classify information with the [ , ] buttons and
press the [BOOK MARK] or [RETURN] button. The
classify information will be added to the file.
• In the following cases, the Classify screen disappears and
the classify information cannot be added.
*
1
Post record is the capability of including material from an interval
after the specified stop point in recording. The interval is set by
an administrator.
STOP button
*
1
appears.
RETURN MENU
CONTROL PANEL
ON/
OFF
- When automatic uploading has started
- When automatic restoring has started
- When the CONTROL PANEL button is set to OFF
- When a fatal error has occurred
- When the SDHC Memory Card slot cover is open
- When the unit is in ACC-OFF mode
There are also other conditions for stopping recording.
For details, see "Stopping Recording" on page 9.
Adding bookmarks
A bookmark can be added to a file that is being recorded
to mark it for playback. (See "Moving back to a previous
skip location to start playback" and "Moving to the next skip
location to start playback" on page 65.)
Press the [BOOK MARK] button.
The bookmark icon
Notes:
• The bookmark icon
[Overlay OSD] is "OFF" (see "Viewing the status of the
recorder (Overlay OSD)" on page 55), the bookmark icon
does not appear.
• Bookmarks can be added with a minimum interval of 2
seconds.
• A bookmark cannot be entered until about 2 seconds after
recording starts.
• It is possible to move the playback location to the
bookmark during playback.
• Bookmarks can be added also during playback.
(See "Adding bookmarks" on page 66.)
• Bookmarks but not classify tags can be added during
recording.
• Classify tags can be added only during playback.
(See "Adding bookmarks" on page 66.)
Playback with the remote control panel is not available
at present. Upgrading is scheduled for the future.
For playback, it is recommended to use the Front-End
application or Back-End Client application.
59
appears for 1 or 2 seconds.
appears on the overlay OSD. When