Panasonic AG-CPD20P Operating Instructions Manual page 113

Error Message
(continued)
No.
Couldn't delete files.
E0461
System error.
E0470
Couldn't restore files.
Couldn't restore files.
E0471
Write error on slot1.
E0481
Record cannot be continued.
Write error on slot.
E048
Record cannot be continued.
Write error on slot.
E048
Record cannot be continued.
Write error on slot4.
E0484
Record cannot be continued.
E07671 CAMERA1 communication error.
Please check the CAMERA1.
E08601 Playback and record cannot be
executed.
The recorder's fan has stopped.
E0860
Radar model file was not found.
E10400
More than 10 radar model files
E10401
were found.
Invalid radar model file was found.
E1040
Radar model file cannot be read.
E1040
E10410 Radar communication error.
Please check the radar setting.
VUP Card found on slot1.
E15751
Record cannot be started.
VUP Card found on slot.
E1575
Record cannot be started.
VUP Card found on slot.
E1575
Record cannot be started.
VUP Card found on slot4.
E15754
Record cannot be started.
E15755 Unsupported Card found on slot1.
Record cannot be started.
E15756 Unsupported Card found on slot.
Record cannot be started.
E15757 Unsupported Card found on slot.
Record cannot be started.
E15758 Unsupported Card found on slot4.
Record cannot be started.
E15759 Unformatted Card found on slot1.
Record cannot be started.
E15760 Unformatted Card found on slot.
Record cannot be started.
E15761 Unformatted Card found on slot.
Record cannot be started.
E1576 Unformatted Card found on slot4.
Record cannot be started.
Message
Check the card information, and proceed as follows according to the
information.
Contact your supplier.
Be sure to use the correct procedure to remove and load SDHC Memory
Cards. Replace an SDHC Memory Card that is not recognized after
inserting it in the SDHC Memory Card slot and closing the SDHC Memory
Card slot cover.
The Color Camera may not be correctly connected. Check whether the camera
cable (included in the Color Camera) is correctly connected to the Color
Camera. Contact your supplier if this measure does not solve the problem.
Close the SDHC Memory Card slot cover.
Contact your supplier.
A card for upgrading is inserted. Data cannot be written to the card.
The inserted card cannot be used.
Check card type.
An unformatted SDHC Memory Card has been inserted.
Replace it with a formatted SDHC Memory Card.
CARD PROTECT:
Release the write-protect switch of the SDHC Memory Card.
UNFORMATTED:
Replace with the formatted SDHC Memory Card.
NO CARD:
Insert an SDHC Memory Card.
Others:
Replace the SDHC Memory Card with another one.
11
Measure