Table of Contents
Advertisement
Setting up/Deleting Officer Data
MANUAL mode
Display the menu on the LCD panel. Then read and load the
officer data from the Officer setup top screen.
1. Press the [MENU] button.
The Menu appears.
,
2. Press the [
] buttons to select [Setup/Info]
and press the [
] button to confirm the entry.
Select
Confirm
,
3. Press the [
] buttons to select [Officer] and
press the [
] button to confirm the entry.
Select
Confirm
The Officer setup top screen appears.
(continued)
Cursor button
RETURN
MENU
MENU button
CONTROL PANEL
ON/
OFF
4. Connect a USB memory device containing
officer data to the recorder.
,
5. Press the [
and press the [
Select
Confirm
,
6. Press the [
press the [
] button to confirm the entry.
Select
Confirm
This registers officer1 and the name and ID appear.
Note:
Long names and IDs may not be displayed in full.
Entering Officer2 data
Replace the USB memory device with the one containing
data for another officer. Then select [Officer2] in Step 5
mentioned above and repeat Step 6.
37
] buttons to select [Officer1]
] button to confirm the entry.
] buttons to select [Load] and
Hide quick links:
Advertisement
Table of Contents
