Table of Contents
Advertisement
Viewing Live Video
Setting camera zoom (in LPR mode)
The camera zoom can be set in the range 1.0 to 22.0 x.
This menu is available only when [Init LPR Mode] in
administrator setup is set to "ENABLE" and [LPR Mode] is
set to "LPR".
Note:
This menu is available only when the [CAMERA 1] connector
input is selected.
1. Press the [MENU] button.
The Menu appears.
2. Confirm that [Camera1] is selected, and press
the [
] button.
Confirm
,
3. Press the [
] buttons to select [LPR Zoom].
The
Select
(continued)
appears.
RETURN
MENU
CONTROL PANEL
ON/
OFF
4. Press the [
] button to raise the ratio.
Press the [
] button to lower the ratio.
Note:
A recording started by a recording trigger during license
plate recognition will automatically switch the camera zoom
setting to [Patrol Zoom]. When recording stop criteria are
met, the camera zoom setting is automatically switched to
[LPR Zoom].
50
Cursor button
MENU button
Raise the ratio.
Lower the ratio.
Hide quick links:
Advertisement
Table of Contents
