Setting The Source Data - Panasonic AG-CPD20P Operating Instructions Manual

Setting up/Deleting Officer Data

Setting the Source data

Display the menu on the LCD panel. Then read the Source
data loaded in the recorder and set. For details on loading
the Source data, see "Load Source" on page 85.
1. Press the [MENU] button.
The Menu appears.
,
2. Press the [ ] buttons to select [Setup/Info]
and press the [ ] button to confirm the entry.
Select
Confirm
,
3. Press the [ ] buttons to select [Officer] and
press the [ ] button to confirm the entry.
Select
Confirm
The Officer setup top screen appears.
(continued)
Cursor button
RETURN MENU
MENU button
CONTROL PANEL
ON/
OFF
,
4. Press the [
press the [ ] button to confirm the entry.
Select
Confirm
The registered Source data list appears.
,
5. Press the [
,
(use the [ ] buttons to go between pages),
and press the [
Select
Confirm
The Source data are set, and the Officer setup top
screen appears.
39
] buttons to select [Source] and
] buttons to select Source data
] button to confirm the entry.