Administrator Setup
Radar/GPS
Radar Model
The model name of the radar gun connected to the recorder
is displayed.
Model Select
Use this function to select a radar gun.
ProLaser :
The recorder is set to support Kustom Signal's Inc.'s
ProLaser3 as standard.
STALKER_:
The recorder is set to support Applied Concepts, Inc.'s
STALKER DUAL.
GOLDEN_:
The recorder is set to support Kustom Signals, Inc.'s
Golden Eagle II.
Note:
To use the recorder with other radar guns, consult your
supplier.
Add Model
,
1. Press the [
] buttons to select [Add Model],
and press the [
] button to confirm the entry.
Select
Confirm
2. Connect the USB memory device containing
the model data to the recorder.
,
3. Press the [
] buttons to select [OK], and
press the [
] button to confirm the entry.
Select
Confirm
A new radar gun is added.
(continued)
Connection of Radar
Use this function to specify the radar gun connection port.
OFF : When not connected
Recorder: When connected to the recorder
Notes:
•
The remote control panel has no function for calculating
the speed of the target vehicle from the moving own
vehicle.
•
No distinction is made between the speed of an
approaching target vehicle and a receding one.
•
Some radar guns come with a function for setting
conditions that enable correct measurement of target
vehicle speed. Use this function according to the
instructions in the Operating Instructions of the radar gun.
•
Error messages appear when the radar gun is operating
abnormally.
GPS
Connection of GPS
Use this function to select GPS data source.
Recorder: Uses GPS data from the GPS module
attached to the recorder.
OFF
: Does not use GPS data.
Collection Time
Use this function to set the time to collect GPS data.
Setting : 5 s, 10 s, 1 s, 2 s
Speed Information
Speed Unit
Use this function to set the speed unit for own and target
vehicles.
Setting : MPH, km/h
90