Kubota Super Series 2 KX 91-3 Operator's Manual page 10

2 SAFE OPERATION
A During excavator use, do not allow any persons within
the working range.
8. Do not allow other persons to use the machine before
having informed him on the exact operation and work
instructions, and be assured that the operator's
manual has been read and completely understood.
9. Do not wear baggy, torn or oversized clothing when
working with the excavator. Clothing can get caught in
rotating parts or control elements which can cause
accidents or injuries. Wear adequate safety clothing,
e.g. safety helmet, safety shoes, eye protection, ear
protection, working gloves, etc., as necessary and as
prescribed by law or statutes.
(1) Helmet
(2) Clothing fit for work
(3) Tight seams
(4) Good grip footwear
(5) Well fitting cuffs
(6) Working gloves
10. Do not allow passengers to ride on any part of the
excavator at anytime. The operator must remain in the
excavator seat during operation.
11. Check mechanical parts for correct adjustments and
wear. Replace worn or damaged parts immediately.
12. Keep your excavator clean. Heavy soiling, grease,
dust and grass can cause fires, accidents or injuries.
13. Use only KUBOTA authorized attachments.
(7) Straw hat
(8) Towel
(9) Baggy trousers
(10) Loose cuffs of the shirt
(11) Baggy shirt
(12) Rubber sandals
14. Before starting the excavator, be absolutely sure that
the excavator has been filled with fuel, lubricated,
greased and undergone all necessary maintenance.
15. Do not modify the excavator, otherwise it could lead to
unforeseen safety problems.
16. Make sure attachments, particularly those utilizing
quick attach systems, are securely mounted.
2. STARTING OF THE EXCAVATOR
1. Get into and out of the machine safely. Always face the
machine. Always use handrails and available steps
and keep yourself well balanced. Do not hold any of
the control levers and switches. Do not jump on or off
the machine, whether stationary or in motion.
2. Start and control the excavator only from the
operator's seat. The driver should not lean out of his
seat when the engine is running.
3. Before starting the engine, make sure that lock levers
are in position "Lock" and all control levers and pedals
are in their neutral positions and the seat belt is
fastened correctly.
4. Make sure that the dozer blade is in front of you. (The
dozer must be raised.) If the levers are activated with
the dozer blade at the rear, the tracks will move in the
opposite direction of the drive levers.
5. Do not operate or idle engine in a non-ventilated area.
Carbon monoxide gas is colorless, odorless, and
deadly.