Operation Of The Arm; Operation Of The Bucket - Kubota Super Series 2 KX 91-3 Operator's Manual

26 EXCAVATOR OPERATION

OPERATION OF THE ARM

Pull back the attachment control lever and the arm will be
pulled in. To move the arm out, push the control lever
towards the front.
A When pulling in the arm, the movement may stop for a
short moment when the arm is in its vertical position.
This is caused by the combined load of the arm and
bucket moving the cylinder piston away from the
hydraulic flow causing a delay in the cylinder action,
until the flow catches up with cylinder piston. This is a
characteristic of the hydraulic system and is no sign of
a malfunction.

OPERATION OF THE BUCKET

To dig using the bucket, move the right attachment control
lever from the neutral position, left. Moving the control
lever right, moves the bucket outwards and empties its
contents.