Lock Lever - Kubota Super Series 2 KX 91-3 Operator's Manual

18 EXCAVATOR OPERATION
(1) Backrest tilt adjust knob
(2) Weight adjust lever
(3) Travel adjust lever
(4) Arm rest
(5) Seat lock lever
C Travel adjustment
Pull the travel adjust lever in the direction of [A] and
slide the seat backward or forward, as required. The
seat will lock in position when the lever is released.
C Weight adjustment
Turn the weight adjust lever to achieve the optimum
suspension setting.
C Tilt adjustment
Pull the backrest tilt adjust lever in the direction of [A]
and move the backrest to the desired angle.
C Height adjustment [KX91-3S2]
Pull up with your hands the seat pan in front of seat
belt to the desired height of the three available
positions.
Once it has reached the highest level, it will return to
the lowest level.
C Arm rest
Arm rest may be set at upright position if desired.
C Arm rest angle adjustment
Turn the arm rest angle adjust knob to the desired
angle.
(A) "UNLOCK"
(B) "TO INCREASE TENSION"
(C) "TO DECREASE TENSION"
(D) "TO INCREASE ANGLE"
(E) "TO DECREASE ANGLE"
2. After starting the engine, bring the
lock levers into the "Unlock" position
to use drive lever or control lever for
front attachments.
BLock Lever
To avoid personal injury:
A To avoid injuries, check safety features all
around the excavator.
A With the lock lever pulled down, the engine
fails to start.
If you try to start the engine with the key with the lock lever
down, the following message appears momentarily on the
meter display.
(1) Lock levers (A) "Unlock"