7525-63x
Remove the speaker.
5.
USB cable removal
Remove the AIO rear cable cover. See
1.
Remove the rear shield. See
2.
Remove the left cover. See
3.
4.
Remove the ADF unit. See
Remove the flatbed. See
5.
Remove the operator panel assembly. See
6.
Pry the front cover off the operator panel.
7.
Remove the two screws securing the rear case to the operator panel cover.
8.
9.
Pull the operator panel cover away from the rear case to access the USB cable.
Route the USB cable off the rear case and remove.
10.
User interface controller card cable removal
Remove the AIO rear cable cover. See
1.
2.
Remove the rear shield. See
Remove the left cover. See
3.
Remove the ADF unit. See
4.
Remove the flatbed. See
5.
Remove the operator panel assembly. See
6.
7.
Pry the front cover off the operator panel.
Remove the two screws securing the rear case to the operator panel cover.
8.
Pull the operator panel cover away from the rear case to access the UICC cable.
9.
Route the UICC cable off the rear case and remove.
10.
Service Manual
4-112
"AIO back cable cover removal" on page
"Rear shield removal" on page
"Left cover removal" on page
"Duplex ADF removal" on page
"Flatbed removal" on page
"Operator panel assembly removal" on page
"AIO back cable cover removal" on page
"Rear shield removal" on page
"Left cover removal" on page
"Duplex ADF removal" on page
"Flatbed removal" on page
"Operator panel assembly removal" on page
4-7.
4-4.
4-87.
4-75.
4-7.
4-4.
4-87.
4-75.
4-8.
4-102.
4-8.
4-102.
Previous
Next
Go Back