Escalating A Fax Issue To Next Level Support - Lexmark X548 Series Service Manual

7525-63x
Step Questions / actions
Adjust the "Receive Threshold" setting in the
19
SE menu. press **411 to enter the SE menu,
enter Modem settings, and select "Receive
Threshold".
Test by adjusting the received signal level by
decreasing/increasing the"Receive Threshold"
setting in steps of 2 db. For example, if default
value is -43 db, changing it to -45 db will
decrease the received signal level by 2 db, and
changing it to -41 db will increase the received
signal level by 2 db. Recommended
adjustment range is between -33 db and -48
db (in 2db steps).
Did this fix the problem?
Press **411 to enter the SE Menu. Select
20
"Print Logs".
Print the T.30 transmission/ job log. Check the
error code being reported. See
2-27. Perform the suggested resolution
page
for the error.
Did this fix the problem?

Escalating a fax issue to next level support

Before contacting your next level support, go to the SE menu on the device and generate a Fax error file. This
file contains machine settings information and debug information that will help second-level support determine
the cause of a failure.
To generate the fax error file, perform the following steps:
In a Web browser, type http://MFP ip address/se.
1.
The MFP's SE menu page will display. Click the "Dump Job History" link. The following displays:
2.
Write down the type of connection, the type of error, and the job in which the error occurred.
3.
4. In the Web browser address bar, type http://MFP ipaddress/se.
Click Report a Fax Problem (A). The fax check list displays.
5.
Service Manual
2-70
Problem resolved.
Problem resolved.
"" on
Yes
Go to step 20.
Contact your next level
support. See
fax issue to next level
support" on page
Previous
No
Next
Go Back
"Escalating a
2-70.