Console Port Information (Administrator Menu); Port Controls (Administrator Menu); Figure 4-11 Port Control Settings - Air Live SNMP-FSH2602G User Manual
24+2 snmp/web switch 24 x 10/100base-tx ports optional gigabit/100basefx modules snmp, web, telnet, console port configurations mib ii, bridge mib, rmon ons
Table of Contents
Advertisement
4 Web Management
Console Port Information
Console is a standard UART interface to communicate with Serial Port.
User can use windows HyperTerminal program to link the switch. Connect To -> Configure:
Bits per seconds: 9600
Data bits: 8
Parity: none
Stop Bits: 1
Flow control: none
Port Controls
(Administrator menu)
User may modify or change mode operation in this page. Please select a port under the "Port" field
and modify the port configuration in the subsequent field.
State: User can disable or enable this port.
Auto Negotiation: User can set auto negotiation mode is Auto, Nway (specify the
speed/duplex on this port and enable auto-negotiation), Force of per port.
Speed: User can set 100Mbps or 10Mbps speed on Port1~Port24; set 1000Mbps, 100Mbps or
10Mbps speed on Port25~Port26 (depend on module card mode).
SNMP-FSH2602G Management Switch
(Administrator menu)
Figure 4-11 Port Control Settings
28
User's Manual V2.0
Advertisement
Table of Contents
