Type a name for the new VLAN.
Type a VID (between 2-4094). The default is 1.
Choose the protocol type.
We support 802.1v with the implementation of Port-and-Protocol-based VLAN
classification. User can combine the field "Protocol Vlan" and the field of the port
number to form a new VLAN group.
From the Available ports box, select ports to add to the switch and click "Add >>". If the trunk
groups exist, you can see it in here (ex: TRK1, TRK2...), and you can configure it is the
member of the VLAN or not.
Click Next. Then you can view the page as follow:
SNMP-FSH2602G Management Switch
39
4 Web Management
User's Manual V2.0