Port Management - Air Live POE-GSH2624-370 User Manual

5. Frames Discarded :
If an LLDP frame is received on a port, and the switch's internal table has run full,
the LLDP frame is counted and discarded. This situation is known as "Too Many
Neighbours" in the LLDP standard. LLDP frames require a new entry in the table
when the Chassis ID or Remote Port ID is not already contained within the table.
Entries are removed from the table when a given port's link is down, an LLDP
shutdown frame is received, or when the entry ages out.
6. TLVs Discarded :
Each LLDP frame can contain multiple pieces of information, known as TLVs (TLV
is short for "Type Length Value"). If a TLV is malformed, it is counted and
discarded.
7. TLVs Unrecognized :
The number of well-formed TLVs, but with an unknown type value.
8. Org. Discarded :
The number of organizationally received TLVs.
9. Age-Outs :
Each LLDP frame contains information about how long time the LLDP information
is valid (age-out time). If no new LLDP frame is received within the age out time,
the LLDP information is removed, and the Age-Out counter is incremented.
10. Buttons
Auto-refresh: Check this box to refresh the page automatically. Automatic refresh
occurs every 3 seconds.
Clear: Clears the counters for the selected port.
Refresh: Click to refresh the page.

4.2 Port Management

4.2.1. Port Configuration
The section describes to configure the Port detail parameters of the switch. Others you
could using the Port configure to enable or disable the Port of the switch. Monitor the ports
content or status in the function.
4.Web Management: System of POE-GSH2624-370
55
AirLive POE-GSH2624-370 User Manual