Product Overview; Introduction; 10/100Mbps Ports Fast Ethernet Switch; Store-And-Forward Architecture Against Packet Loss - Air Live Live-FSH8SB User Manual

8 × 10/100mbps nway 10/100base-tx fast ethernet switch with auto-mdi/mdix
Hide thumbs Also See for Live-FSH8SB:
Table of Contents

Advertisement

1

Product Overview

Introduction

8× 10/100Mbps ports Fast Ethernet Switch
Live-FSH8SB Fast Ethernet Switch is an auto-sensing and auto-negotiating 10/100BASE-TX
Fast Ethernet Switch with VLAN and Priority capability. Its eight 10/100Mbps station ports
provide 10/100Mbps connections to Ethernet/Fast Ethernet network.
Live-FSH8SB's unique switching fabric provides full wire speed for all ports. With auto-sensing,
Live-FSH8SB automatically detects the speed of the devices you plug into, and routes the incoming
data to its destination. Its auto-negotiating function allows existing devices running at different
speeds to communicate easily within the same network.

Store-and-Forward Architecture against Packet Loss

When network is under heavy traffic, the shared memory buffer in the switching devices might yield
incorrect detections due to overfed memory buffer. This setback can happen either when data is
transmitted in IEEE802.3x Full Duplex or Back Pressure Flow Control mode. To solve this problem,
Live-FSH8SB utilizes a fixed memory buffer allocation with Store-and-forward transmission to
ensure an effective buffer allocation for each port.
Store-and-forward transmission controls data flow from transmitting to receiving nodes with the
receiving buffer threshold adjusted to an optimal value, thus guaranteeing against all possible packet
losses.

Active Flow Control

Live-FSH8SB Fast Ethernet Switch implements in full duplex mode a flow control that is compliant
with the IEEE 802.3x standard. While in half duplex mode, it employs an optional Back Pressure
Flow Control to stall the incoming data when port buffers are saturated. With this flow control
mechanism, it can be ensured that frames dropped during transmission are reduced to a minimum.

Full Wire Speed

Live-FSH8SB's Full Wire Speed feature provides high-end performance for departmental and
workgroup environments at a fraction of the cost of similar devices. Typically, this feature was
found only in high-end switches designed to handle huge corporate networks. With bandwidth needs
and network efficiency concerns, Live-FSH8SB's switching fabric design is the perfect answer for
bandwidth enhancement solution.

System/Port Status Information at a Glance

There are 2 sets of LEDs on the front panel: System LEDs and Station Port LEDs.
1
Live-FSH8SB Fast Ethernet Switch
1 Product Overview
User's Manual V1.0

Advertisement

Table of Contents
loading

Table of Contents