Presentation To Go (Ptg) Installation - Dell S500 User Manual

Presentation to Go (PtG) Installation

Minimum system requirements to install PtG are as follow:
Operating System:
- Windows
Microsoft Windows XP™ Home or Professional Service pack 2/3 32-bit
(recommended), Windows
32-bit or 64-bit
- Office 2003 and Office 2007
NOTE:
S500wi models.
In order to use your USB Viewer, you need to complete the steps below:
1
Enable Wireless/LAN function on the projector. See "Wireless/LAN Settings
(in LAN Mode)" on page 62.
NOTE:
Wireless / Network.
2 Plug the USB Flash to your projector.
NOTE:
• Only supports the JPEG format photo within 10 Mb x 40 M pixels.
• The PtG converter can convert your PowerPoint files into PtG files. See "PtG
Converter - Lite Application Software" on page 86
• You can download the "PtG Converter - Lite" from Dell Support site at:
support.dell.com.
3 On INPUT SOURCE menu, select Multuple Display and then select USB
Viewer on the sub-menu. See "INPUT SOURCE MULTIPLE DISPLAY" on
page 52. The Presentation to Go Screen appears:
82 Using Your Projector
Downloaded From projector-manual.com DELL Manuals
®
Vista 32-bit, and Windows
Presentation to Go (PtG) installation steps are the same for the S500 and
When you start wireless, please wait about 50 seconds to reboot the
®
7 Home or Professional