Dell S500 User Manual page 57

D
ISPLAY
The image settings menu provides the following options:
H
the image left.
V
image down.
F
match the frequency of your computer's graphics card. If you see a vertical
flickering wave, use the Frequency control to minimize the bars. This is a
coarse adjustment.
T
card. If you experience an unstable or flickering image, use Tracking to
correct it. This is a fine adjustment.
A
image appears. Options are: Origin, 16:9, and 4:3.
•Origin — Select Origin to maintain the aspect ratio of the image
projector according to the input source.
•16:9 — The input source scales to fit the width of the screen to project a
16:9 screen image.
•4:3 — The input source scales to fit the screen and projects a 4:3 image.
Z
Downloaded From projector-manual.com DELL Manuals
S ( PC M
ETTINGS IN
P
ORIZONTAL OSITION
P —
ERTICAL OSITION
—
Allows you to change the display data clock frequency to
REQUENCY
—
Synchronize the phase of the display signal with the graphic
RACKING
R —
Allows you to select the aspect ratio to adjust how the
SPECT ATIO
—
Press and
OOM
Z
Navigation menu.
Use
)—
Select and press
ODE
—
Press to move the image right and
Press to move the image up and
to zoom and view the image.
Adjust the image scale by pressing
and press
only.
N —Press
OOM AVIGATION
to activate image settings.
to view on your remote control
to activate the Zoom
to navigate the projection screen.
Using Your Projector
to move
to move the
or
57