Presentation to Go (PtG) Installation
Minimum system requirements to install PtG are as follow:
Microsoft Windows XP™ Home or Professional Service pack 2/3 (32-bit
recommended), Windows Vista 32-bit, or Windows
32-bit or 64-bit
- Office 2003 or Office 2007
In order to use your USB Viewer, you need to complete the steps below:
"Wireless and LAN" option and "Wireless connection" default are enabled.
Plug the USB Flash to your projector.
• Supports only the JPEG format photo within 10 MB x 40 M pixels.
• The PtG converter can convert your PowerPoint files into PtG files. See "PtG
• You can download the "PtG Converter - Lite" from the Dell Support site at:
At INPUT SOURCE menu, select Wireless/USB and then select USB Viewer
on the sub-menu. See "INPUT SOURCE WIRELESS/USB" on page 39.
Downloaded From projector-manual.com DELL Manuals
Presentation to Go (PtG) installation steps are the same for the 4220 and
Converter - Lite Application Software" on page 72.
When the Wireless and LAN function is disabled , Go to LAN Settings menu,
select the "Enabled" in the "Wireless and LAN" option to activate the Wireless
and LAN function.
When the Wireless connection is disconnected, Go to Wireless Settings
menu, select the "Connected" in the Wireless option to enable wireless
7 Home or Professional
Using Your Projector