Presentation To Go (Ptg) Installation - Dell S300wi User Manual

Presentation to Go (PtG) Installation

Minimum system requirements to install PtG are as follow:
Operating System:
- Windows
Microsoft Windows XP Home or Professional Service pack 2/3 32-bit
(recommended), Windows Vista 32-bit, and Windows 7 Home or Professional 32-
bit or 64-bit
- Office 2003 and Office 2007
In order to use your USB Viewer, you need to complete the steps below:
1
Enable Wireless / Network connection on the projector. See "WIRELESS /
NETWORK" on page 56.
NOTE:
When you start wireless, please wait about 50 seconds to reboot the
Wireless / Network.
2
Plug the USB Flash to your projector.
NOTE:
• Only support the JPEG format photo within 10Mb 40M pixels.
• The PtG converter can convert your PowerPoint files into PtG files. See "PtG
Converter - Lite Application Software" on page 81
• You can download the "PtG Converter - Lite" from Dell Support site at:
support.dell.com.
3
On INPUT SELECT menu, select Multiple Display and then select USB
Viewer on sub-menu. See "Input Select Multiple Display" on page 46. The
Presentation to Go Screen appears.
78 Using Your Projector