R
ESET
W
/LAN S
IRELESS
wireless settings. The wireless settings menu provides the following options:
W
IRELESS
the wireless connection.
DHCP S
S
TART
address of the DHCP server to the projector connected to the wireless.
E
IP A
ND
the DHCP server to the projector connected to the wireless.
S
UBNET
G
ATEWAY
administrator if you configure it manually.
DNS—
administrator if you configure it manually.
S
TORE
settings.
64
Using Your Projector
Downloaded From projector-manual.com DELL Manuals
4. If you select Store without pressing the Enter button, the system will
keep the original settings.
—
Press
to reset network configuration.
(
W
ETTINGS
IN
IRELESS
—
Default option is Connected. Select Disconnected to disable
NOTE:
It is recommended to use the default settings for Wireless
Connect.
—
Allows you to enable DHCP server of the wireless.
ERVER
IP A
—
Automatically or manually assigns the Start IP
DDRESS
—
Automatically or manually assigns the End IP address of
DDRESS
M
—
Configure the Subnet Mask of the wireless connection.
ASK
—
Check the Gateway address with your network/system
Check the DNS Server IP address with your network/system
—
Press
to save the changes made in wireless configuration
NOTE:
1. Use
and
Gateway, DNS, and Store.
2. Press the
button to enter IP Address, Subnet Mask, Gateway, or
DNS to set the value. (The selected option is highlighted in blue)
a
Use
and
b
Use
and
M
)—
Select and press
ODE
button to select IP Address, Subnet Mask,
buttonto select the option.
button to set the value.
to activate