Remote Controller Operation; Record/Replay Function; Recording An Image - JRC JFC-130 Instruction Manual

3.5

Remote Controller Operation

Record/Replay Function

Using the record/replay function, you can record up to two of the images
appearing in the right-hand side of the screen. You can replay the recorded
images anytime.
The recorded images are lost when the power is turned off
< Recording an Image
To record an image, follow these steps:
1.
Press the REC key on the image you want recorded, to call up the
RECORD PICTURE menu.
2. SHIFT
Press the or
▼
3.
Press the key. The image has now been recorded. The RECORD
PICTURE menu disappears automatically and exits to the fishfinding
display.
Next time the RECORD PICTURE menu is called up, it comes up with an
asterisk(*) appearing under the number recorded.
If you record an image for a number already recorded, the
existing image would be overwritten and updated with the new
image.
50
Operation
RANGE
key to move to the number of your choosing.
▼
RECORD PICTURE
１ ２
RECORD : RETURN TO F/F
: RECORDING PICTURE
RECORD PICTURE Menu