Error Messages; Can't Back Up; Can't Read Data; Language Type - JRC JFC-130 Instruction Manual

Error Messages

When the following error messages are displayed, take corrective action as
suggested.
< CAN'T BACK UP
The current settings could not be recorded for some reason.
l Action
Turn off the echo sounder, and turn on again after several seconds. If the
echo sounder still works no good, call the distributor, office, or dealer from
whom the instrument was purchased.
< CAN'T READ DATA
The instrument was turned on, but the previous settings in memory had been
corrupted and could not be loaded.
l Action
Turn off the echo sounder, and turn on again after several seconds. If the
echo sounder still works no-good, please call the distributor, office, or dealer
from whom the instrument was purchased.
< LANGUAGE TYPE
The case of appearing "LANGUAGE TYPE" menu.
The previous settings in memory had been corrupted and could not be
loaded or the master reset operation was executed.
l Action
Turn off the echo sounder, and turn on again after several seconds. If the
echo sounder still works no-good, please try to execute a master reset.
Never execute a master reset if you do not know the installed transducer
type, and call the distributor, office, or dealer from whom the instrument
was purchased.
To execute a master reset, see next item.
46
Operation
正常にバックアップ出来ません！

CAN'T BACK UP !

Error message
バックアップデータが不良です！

CAN'T READ DATA !

Error message

LANGUAGE TYPE

1.JAPANESE
2.ENGLISH
▲ 3.NORWEIGAN
▼ 4.SPANISH
5.CHINESE
6.KOREAN
GRAPH：FIX LANGUAGE
表示言語選択
1.日本語
2.ENGLISH
▲ 3.NORSK
▼ 4.SPANISH
5.中文
6.韓国語
グラフ：言語選択の終了
LANGUAGE TYPE Menu