Table of Contents
Advertisement
Installation Guide
19. Expand the Configuration menu item and select Services
20. Select Enable DHCP Server to ensure the Access Point can provision IP addresses to requesting clients
over the specified interface.
NOTE
Select + Add and provide a starting and ending IP range of addresses that constitute a pool of addresses
available to requesting clients.
21. Select Apply to commit the updates to the Access Point's DHCP configuration.
22. At this point, you're ready to connect to the WiNG Express managed network using the security
restrictions applied to the newly created WLAN. Ensure the new secure WLAN has been enabled, and
check whether a client is able to access the WiNG Express network
NOTE
A VLAN must be already configured and available to the DHCP server as
a viable interface between the Access Point and requesting client. Refer
to the LAN IP Interface Settings field (within the Edit Access Point
screen), and add a VLAN.
Only when the new WLAN configuration is validated as accessible
should the existing WiNG Express default WLAN be deleted.
.
.
31
Advertisement
Table of Contents
