Table of Contents
Advertisement
Installation Guide
5. Attach an Ethernet cable from the Access Point to a controller with an 802.3af compatible power source
or use the PWRS-14000-148R power supply to supply power to the AP-6522E (once fully cabled).
6. Attach appropriate antennas to the connectors.
7. Attach an Ethernet cable from the Access Point to the controller with an 802.3af compatible power source.
8. Verify the unit has power by observing the LEDs.
CAUTION
1 - 0
D I O
R A
l e
n s o
C o
o E
1 / P
G E
1 2 V
D C
2 - 1
D I O
R A
If not using an 802.3af capable controller to power the AP-6522E,
ensure only the AP-6522E's designated power supply
(PWRS-14000-148R) is used to supply power to the Access Point.
Using an incorrectly rated power supply could damage the unit and
void the product warranty. Do not actually connect to the power
source until the cabling portion of the installation is complete.
1 - 0
D I O
R A
l e
n s o
C o
o E
1 / P
G E
1 2 V
D C
2 - 1
D I O
R A
17
Advertisement
Table of Contents
