Basic WiNG Express Access Point Configuration
For a WiNG Express SKU (AP6522E), both the WiNG Express UI and an over the air (OTA) provisioning configuration
are required for a basic setup and network connection. For a non WiNG Express SKU (AP6522), there's no OTA
support, and the Access Point utilizes just the UI for its basic setup.
To provide the Access Point a basic configuration and access WiNG Express management functions:
1. Power up the Access Point.
The Access Point can be powered using an appropriately rated power adapter, POE injector or POE switch
2. Connect to the Access Point.
For WiNG Express models:
Connect to the WiNG Express SSID. For Windows systems, locate the SSID by selecting the network icon
on the bottom right corner of the screen. For MAC systems, locate the SSID by selecting the network icon
on the top right corner of the screen.
Open a browser (Chrome, Firefox or Internet Explorer) and enter
For non-WiNG Express models:
Refer to the bottom of the Access Point to obtain the numeric IP address used for connecting to the device.
Point the Web browser to the Access Point's IP address. The login screen displays.
For information on using WiNG Express beyond this initial setup, refer to
the Motorola Solutions WiNG Express Users Guide to familiarize yourself
with the WiNG Express Access Point operating system. The guide is
available at https://portal.motorolasolutions.com/Support/US-EN.
The login screen displays.