Using Permanent Horn and Lights
If Permanent Horn and Lights is enabled, horn and lights will
automatically be turned on when the radio powers up.
Procedure:
1 Press the Menu Select button directly below H/L once to
turn off the alarm(s).
2 Press the Menu Select button directly below H/L
momentarily to enable the last selected alarm(s).
The display briefly shows the enabled alarms, and then
reverts back to the selected mode.
106
English
Changing the Selected Alarms
Procedure:
1 Press the Menu Select button directly below H/L until the
display shows the required alarm.
2 Press the Menu Select button directly below the required
entry and the display exits to Home screen.
Press the Menu Select button directly below the entry activates
the option. Below are the selections available.
H+L
• Select
to turn on both horn and lights. The display shows
Horn/Lites on
.
Lgts
• Select
to turn on the lights. The display shows
on
.
Horn
• Select
to turn on the horn. The display shows
Off
An
entry is shown at the softkey when one of the features
Off
above is active. Selecting the
alarm.
Lights
Horn on
.
deactivates the current active