Receiving and Making a Selective Call
This feature allows you to receive a call from or to call a specific
individual. It is intended to provide privacy and to eliminate the
annoyance of having to listen to conversations that are of no
interest to you.
Receiving a Selective Call
1 When you receive a Selective Call, you hear two alert tones
and the LED lights up solid yellow. The call received icons
blink and the display alternates between Call received and
the home display.
2 The speaker unmutes.
3 Hold the microphone vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
4 Press and hold the PTT button to talk. Release the PTT
button to listen.
If you press PTT button before pressing the Menu
Select button directly below Call, your conversation will
be heard by all members of the talk group.
If 20 seconds pass before you press the Menu Select button
directly below the
, you will not respond privately to the call
just received. Instead, you initiate a Selective Call. See Making
a Selective Call on page 42.
Making a Selective Call
Press the preprogrammed Quick Access (One-Touch)
Selective Call button to dial the preprogrammed ID and
proceed to Step 4.
Follow the procedure below.
(on the keypad mic.) to Call.
2 Press the Menu Select button directly below Call. The
display shows the last transmitted or received ID.
3 Press the Menu Select button directly below Cnts to scroll
through and select the required ID.
Press the Menu Select button directly below List to go to
the last number dialed.
to the required ID.
Use the keypad to enter the required ID.
4 Hold the microphone vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.