Radio Programmed for Non-Talkback Scan
1 Press the PTT button at any time to transmit on the selected
channel or fixed channel.
To make a Call Alert page, or Private Conversation call while
scanning, press either the Menu Select button directly below
. The call is entered on the selected channel and
scanning is halted until the call is exited by pressing
pressing the Menu Select button below either
Deleting a Nuisance Channel
If a channel continually generates unwanted calls or noise
(termed a "nuisance" channel), you can temporarily remove the
unwanted channel from the scan list.
This capability does not apply to priority channels or the
designated transmit channel.
1 When the radio is locked onto the channel to be deleted,
(on the keypad mic.) to Nuis.
2 Press the Menu Select button directly below Nuis.
Restoring a Nuisance Channel
To restore the deleted nuisance channel, do one of the
• Turn scan off, then on.
• Change modes.
• Turn off the radio, and then turn it back on.
Nuisance mode delete can be disabled by the system