Terminal Temporary Disable/Enable; Terminal Permanent Disable - Motorola MTM800 E Feature User Manual

Feature
RMS Mode (applicable only for * and #)
Rotary Switches Lock/Unlock
RUA/RUI Log On/Off
Screen Saver Activation
Sending Predefined Message
Sending Status
Sending User Defined Message
Speaker Enable/Disable Per Call
Timed Talkgroup Change
TMO / DMO Switch
TMO Talkgroup Scan
Transmit Inhibit Mode (TXI)
Your service provider can assign one-touch functions only to the side buttons and keypad keys.
Note: If the One-Touch Button feature is enabled, the One-Touch Dial is disabled. If no feature is assigned
to a button, your radio displays an Unassigned Button message.

Terminal Temporary Disable/Enable

Your radio is provided with a feature that allows your service provider to disable it temporarily in case it is stolen.
When your radio is disabled or is powered up in disabled state, it looks and acts like it is turned off.
If your radio is found, your service provider can enable it again over the air. After your radio is enabled, you may
resume normal operation.

Terminal Permanent Disable

Your radio is provided with a feature that allows your service provider to disable it permanently in case it is stolen or
lost. When your radio is disabled permanently, it becomes inoperable. After a Permanent Disable your service
provider cannot enable your radio. It is recommended to Permanent Disable your radio only when you do not expect
to recover it. If it is recovered then a Permanent Disable radio can be reactivated by returning it to Motorola.
Note: This is a selling feature.
Description
Toggles on/off RMS feature.
Locks/unlocks the Rotary Switches.
Asks for the credential or logs off the radio.
Turns on/off the Screen Saver feature.
Sends a predefined message to a dedicated address.
Sends a dedicated status message to a dedicated address.
Sends a user defined message to a dedicated address.
Enables the loudspeaker for a duration of the ongoing call..
Makes a predefined talkgroup the selected talk group for a specified
amount of time. While using the predefined talkgroup, the second
press of the One-Touch Button results in: returning to the previously
selected talkgroup, restarting the predefined time, or no action
(depending on configuration). After the timer expires, the radio
returns to the previously selected talkgroup.
Toggles between TMO and DMO modes.
Turns on/off the Talkgroup Scan feature in TMO Mode.
Turns on/off the Transmit Inhibit Mode.
Getting Started | 29
| | Send Feedback