Using Siren, PA and Light
Your radio supports siren and light via the keypad microphone.
The keypad microphone can be preprogrammed to enable
siren, public address and light.
Using Keypad as Siren Type Selector
The keypad can be preprogrammed as different types of siren.
Each button can be preprogrammed as a different siren tone.
For example, pressing the preprogrammed button turns on the
siren.
Procedure:
1 Press the preprogrammed siren button to turn on the siren.
The display shows Siren on.
2 Press a different preprogrammed siren button to change the
siren tone.
OR
Press the same preprogrammed button to turn off the siren.
104
English
Using Keypad as Light Type Selector
The keypad can be preprogrammed as different types of light.
Each button can be preprogrammed as a different light. For
example, pressing the preprogrammed button turns on the light.
Procedure:
1 Press the preprogrammed light button to turn on the light.
2 Press a different preprogrammed light button to change the
light.
OR
Press the same preprogrammed button to turn off the light.
Using the Public Address Button on the Keypad
The keypad can be preprogrammed to enable the radio's
internal public address (PA) system.
Procedure:
1 Press the preprogrammed public address button to turn on
the public address feature. The display shows PA on.
2 Press the preprogrammed public address button to turn off
the public address feature.
When the internal public address and siren feature are turned
on at the same time, the display shows
Siren/PA on
.